Model IPHOZ
 
 

For horizontal lifting and transfer

These are typically used for the lifting and transfer of thin plates which will sag or bend when lifted. Designed for use in pairs or multiples of two, the maximum top angle is 60°.

 
Spare parts for IPHOZ lifting clamps: Order No.
1. body complete  
3. camsegment complete 1234
6. camsegment shaft complete 1046
Before using the clamp always read the Operator’s supplied with the clamp.
Model Order
No.		 WLL
per pce
in t		 Weight
per pce
lbs
4,5-IPHOZ 5404 4.5 38
6-IPHOZ 5405 6.0 63
9-IPHOZ 5406 9.0 93
12-IPHOZ 5407 12.0 95
15-IPHOZ 5408 15.0 167
     
        Fig. 1   Fig. 2

Model Order
No.		 WLL
per pce
in t		 Jaw
A		 Dimensions In Inches Weight per
pce lbs
B C D E F G H J K
4,5-IPHOZ 5404 4.5 0-1 3/4 5 7/16 63/64 – 1 3/16 4 61/64 8 21/32 4 23/32 25/32 25/64 38
6-IPHOZ 5405 6.0 0-2 3/8 6 47/64 1 3/16 – 1 27/64 5 5/16 9 1/4 5 1/8 25/32 25/32 63
9-IPHOZ 5406 9.0 0-2 3/8 8 5/16 1 3/16 – 1 11/16 6 17/32 10 55/64 6 19/64 1 25/32 93
12-IPHOZ 5407 12.0 0-2 3/8 8 35/64 1 37/64 – 1 27/32 6 39/64 11 37/64 7 31/64 1 3/4 95
15-IPHOZ 5408 15.0 0-2 3/8 8 21/32 1 37/64 – 1 27/32 7 13/64 12 31/64 9 27/32 1 55/64 167