Standard Chain Mesh Slings
Type CMSC with chain coupler connectors
- Weldless Alloy steel fittings
- Alloy Lifting Chains comply with ASTM 391
- Each sling comes Proof Tested to 2 x WLL
- Maximum Operating Temperature 400°F without permanent loss of Capacity, see table for details
Type 1 TC, for Choker and Basket
Above shown made with 3/8” x 4 chain strands.
Type 2 TT, for Basket Hitches
Above shown made with 7/32” x 6 chain strands.
Each Sling comes with a durable marked Capacity Tag and a colour coded serial number Bar-Loc showing year of last Inspection and Proof Test Certification. Each sling is entered into Unirope’s FIELDID Asset Management System for you to access at any time.
CMSS Standard Chain Mesh Slings are made from 6 mm chain with 4 or 6 strands, 8 mm chain with 4 or 6 strands and 10 mm chain with 4 strands. The alloy chains are made in either Germany or the USA.
Above shown: 3/8 x 4 (left) and 7/32 x 4 (right)
CMSS Chain Mesh Slings are made with regular chain connectors which are larger in thickness than the SLIM type chain mesh slings (see on right).
Shown above are 3/8” x 4 strand standard type chain mesh slings
Below listed sling types are the most popular ones. More selections is available in chain sizes of 6 mm,
8 mm, 10 mm and 13 mm and up to a WLL of 76,800 lbs in a 90° Basket hitch. Ask for deatils.
|Working Load Limit lbs (Design Factor 5:1)
|Type||Product Code||Sling Width||# of
(1) Choker Capacity applies to Type 1 slings ONLY.