Inspection, Repair, Re-Certification, and FIELD-ID Tags

Our Testing and Inspection team performs these services at Unirope or at the customer’s (Ontario and Quebec only) location. ALL of our Inspection and Repair services are managed with the help of our online inspection system. This system may, or may not, employ RFID tags.

The advantage for you is that you can have access to all inspection details, results, test certificates, inspection schedules etc., via the internet 24/7/365.
In fact, you can even do your own inspections (as required by your Provincial safety legislation) and enter them into the same database. You can assign your own serial- or unique ID numbers, you can assign in which department or location the sling or lifting equipment is located; you can even change the location if the sling ‘moves around’ within your plant or within your company.
Of course at any time you can print, as often as you want, any test certificate on file.

And, best of all, in the event of a safety inspection you have a fully traceable sling inspection record on hand.
Plus, at your fingertips you have a full listing of all slings and lifting equipment in your possession, and you are able to sort that list by internal location/department, type of sling, serial number, next inspection date, etc.

In addition you have a record of all inspection and product repairs done by Unirope, who tested it, what was repaired, why, and when.

Proof Testing of synthetic slings Proof Testing of sheave blocks
1.2 Mill lbs test bed in our Mississauga facility Proof Testing of rigging hardware Destruction testing of wire rope

These are our mobile inspection trucks with installed 150,000 lbs proof test beds and each with their own 20 KV power generation equipment. Unirope’s Field Inspection staff is NCCCO and/or Rigger’s Mortis® certified. All inspection and re-certifications are based on the ASME B30 Standards series and meet all Provincial requirements accross Canada.