Cable Grips for Wire Rope Installation are made from a wire hollow braid. They are being pushed over the rope end and tighten as soon as tension is applied. Our cable grips are made from a heavy duty strand which is much stiffer and much stronger than the one commonly used for electrical cable installations. Also, our grips are much longer in length to provide increased holding and gripping force.

Most common type for smaller diameter ropes is ‘Open Ended‘ to pull same sized wire ropes.

Loop Ended‘ are preferred for larger diameter ropes. They allow to install a swivel between the grips to compensate for rope rotation.

 

Open Ended Cable Grip

 

Loop Ended Cable Grip

 

Installation Swivel

To connect 2 Loop ended Cable Grips together. This allows the installer to have the old- and new rope separated with a swivel to prevent torque and rotation transfer.