So-PowerPoint PP-VIP

Thread reach with Variable lengths available. When ordering implicitly indicate the required length.

Connection only with RUD approved components. The VIP chain connection is fool proof.

The BG recommends the following min. thread lengths:
1 x M for Steel
1.25 x M for Cast
2 x M for Aluminium

Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.

PowerPoint PP-S

The first generation of lifting points with a double ball bearing for jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points as well as the load from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line.

Not suitable for permanent swiveling under full load.
Maximum WLL with the smallest thread diameter.

Version PP-B: the ring connection for hook assemblies.

PowerPoint PP-S

The first generation of lifting points with a universal connection for every lifting appliance (hook and ring assemblies, round slings, loops, endless slings, etc.), with a double ball bearing which enables jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points, as well as the load, from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.

Maximum WLL with the smallest thread diameter.
Thread length: 18 mm.

Version PP-S: the standard universal ring connection using eye hooks for ring assemblies, round slings, wire ropes, hook assemblies.

PowerPoint PP-B

The first generation of lifting points with a double ball bearing for jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points as well as the load from being damaged.
Even under full load, can be turned in a 90° position from the bolt centre line.

Version PP-B: the ring connection for hook assemblies.