PowerPoint® PP-VIP Direct VIP Chain Connection, Metric Thread

Posted on:

PowerPoint PP-VIP

The first generation of lifting points with a double ball bearing for the direct connection of the VIP chain.

Version PP-VIP.

Even under full load, can be turned in a 90° position from the bolt centre line.

Not suitable for permanent swiveling under full load.

So-PowerPoint PP-VIP

Thread reach with different lengths is available.

WLL is equivalent to that of WBG-V, since a corresponding lower part is used. Connection only with RUD approved components.

Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.

PowerPoint® PP-B Ring Connection, UNC Thread

Posted on:

PowerPoint PP-S

The first generation of lifting points with a double ball bearing for jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points as well as the load from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line.

Not suitable for permanent swiveling under full load.
Maximum WLL with the smallest thread diameter.

Version PP-B: the ring connection for hook assemblies.

PowerPoint® PP-S Universal Connection, UNC Thread

Posted on:

PowerPoint PP-S

The first generation of lifting points with a universal connection for every lifting appliance (hook and ring assemblies, round slings, loops, endless slings, etc.), with a double ball bearing which enables jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points, as well as the load, from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.

Maximum WLL with the smallest thread diameter.
Thread length: 18 mm.

Version PP-S: the standard universal ring connection using eye hooks for ring assemblies, round slings, wire ropes, hook assemblies.

PowerPoint® PP-B Ring Connection, Metric Thread

Posted on:

PowerPoint PP-B

The first generation of lifting points with a double ball bearing for jerk-free turning, swiveling and tilting.

The optimized design prevents the lifting points as well as the load from being damaged.
Even under full load, can be turned in a 90° position from the bolt centre line.

Version PP-B: the ring connection for hook assemblies.

PowerPoint® PP-S Universal Connection, Metric Thread

Posted on:

PowerPoint PP-S

The first generation of lifting points with a universal connection for all slinging means (hook and ring assemblies, endless slings, round slings, loops, etc).

With a double ball bearing for jerk – free turning, swiveling, and tilting.

Version PP-S: the standard universal connection with eye hooks for ring assemblies, round slings, wire ropes and hook assemblies.

So-PowerPoint PP-S

The first generation of lifting points with a universal connection for all slinging means (hook and ring assemblies, endless slings, round slings, loops, etc).

With a double ball bearing for jerk – free turning, swiveling, and tilting.

Version PP-S: the standard universal connection with eye hooks for ring assemblies, round slings, wire ropes and hook assemblies.