PSA STARPOINT UNC Thread

Posted on:

PSA-Starpoint PSA-VRS-UNC

Lifting point to be used as an anchor point for personal protective equipment (acc. to DIN EN 795), certified by the German BG BAU ( Employer’s insurance association of the building industry).

Star-shaped, distinctive variety to DIN 580 eye bolt.

Colour: remarkable yellow powder coating.

Marking: acc. to DIN EN 365 including statement for the number of load bearing persons (1 or 2 persons).

The VRS-PSA is not supposed to be used permanently outdoor. For this application we recommend the PSA-INOX-Star.

Forged material 1.6541, high-tensile quenched and tempered, 100% electromagnetic crack inspected (according to En 1677-1).

Safety factor: 4

Bolt in material quality should be at least 1.0037 (ST37).

In light metal, non-ferrous heavy metal, grey cast iron, concrete, wood, and stone, the determination of the thread must be chosen in such a way that the thread working load complies with the base material (please observe the data of the plug manufacturer).

PSA STARPOINT Metric Thread

Posted on:

PSA-Starpoint PSA-VRS
with or without fixed length

Lifting point to be used as an anchor point for personal protective equipment (acc. to DIN EN 795), certified by the German BG BAU ( Employer’s insurance association of the building industry).

Star-shaped, distinctive variety to DIN 580 eye bolt.

Colour: remarkable yellow powder coating.

Marking: acc. to DIN EN 365 including statement for the number of load bearing persons (1 or 2 persons).

The VRS-PSA is not supposed to be used permanently outdoor. For this application we recommend the PSA-INOX-Star.

Forged material 1.6541, high-tensile quenched and tempered, 100% electromagnetic crack inspected (according to En 1677-1).

Safety factor: 4

Bolt in material quality should be at least 1.0037 (ST37).

In light metal, non-ferrous heavy metal, grey cast iron, concrete, wood, and stone, the determination of the thread must be chosen in such a way that the thread working load complies with the base material (please observe the data of the plug manufacturer).

PSA INOX-STAR

Posted on:

PSA-INOX-STAR-Eyebolt
with or without fixed length

Lifting point to be used as an anchor point for personal protective equipment (acc. to DIN EN 795), certified by the German BG BAU ( Employer’s insurance association of the building industry).

Penta-shaped, distinctive variety to DIN 580 eye bolt.

Marking: acc. to DIN EN 365 including statement for the number of load bearing persons (1 or 2 persons).

Forged material 1.4462; 100% electromagnetic crack inspected, with a good resistance against removing and local corrosion, like pitting or selective corrosion, crevice corrosion, and stress crack corrosion in salt water and high-chloride, as well as in H2S containing medias.

The material must not be used in the following environment: indoor swimming pool atmosphere, especially at load bearing construction, without being constantly flushed by water or regularly cleaned. If that happens, the malfunction leads to personal injuries.

For example as a fixing of water slides or any other construction element (ISER-code of practice 831).
Captive hexagon socket screw.
Component is protected by Patent: GM9402014
GM 9316475 additional patents are applied.

LBS-RS Load Ring Welded Stainless Steel

Posted on:

Load ring for welding LBS-RS, Stainless Steel, without spring

A stainless steel load ring for welding made of the material 1.4571 (in welded condition resistant against inter-cristalline corrosion, in permanent operation up to 400°C).

The chemical resistance and resistance against pitting by chloride media have increased due to the Mo contents.

The material 1.4571 is widely used in the chemical industry, petroleum, coal-tar chemistry, and textile industries.

Use the Castolin ARC A Mo90009N welding electrode or consult the manufacturer for the appropriate solution with respect to the work piece.

Observe the requirements of DIN 8556 part 1.

ABA Weldable Lifting Point

Posted on:

ABA Weldable Lifting Point

Loadable from any direction.

Safety factor: 4:1

Quenched and tempered part, thereby wear resistant.

Patentented wear markings, inside and outside.

Circulating fillet weld.

Surface phosphated.

If component is used as lashing-point, stated WLL at the component can be doubled.

VABH-W Mounting Hook, Ready for Welding

Posted on:

Excavator hook welded VABH-W

Excavator hook used as a lifting point for wire rope slings, round slings and lifting means with an oval suspension ring or eye.

With a stable hook securing mechanism protected by a ridge, comparable to that of the VCGH.

Thickened tip of the hook to avoid misuse, thus hooking into smaller openings is impossible.

Patented wear marks on the hook.

Pay attention to the permissible load direction.

With a phosphated surface.

Pay attention to the correct thickness of the weld.

Welding should only be carried out by qualified persons according to EN 287-1.

Material: 23MnNiCrMo52.

VRBK Load Ring Welded for 90°-Corners

Posted on:

Eye Plate for Corners VRBK

An enhancement of the well-established RBK-series with an over 30% increment of the WLL.

A forged ring bracket according to EN1677-1.
Electro-magnetically crack detected.
Pink powder coated.
Can be loaded in all directions.

Even force distribution owing to the two point attachment.

Low profile, since it can be folded within an angle range of 270°.

The welding block for edges is forged out of a good welding material 1.0577+N (St 52-3) and clearly stamped with an identification number for the permissible WLL.

VRBS Welding Block

Posted on:

VRBS Welding block VASK

The welding blocks are forged out of the material 1.0577+N (St 52-3) and are marked with the identification number of the permissible nominal WLL.

The patented distance lugs have a distance measurement function for the required spacing to the root weld (approximately 3 mm).

Welding should be carried out by a qualified person according to EN 287-1.

The chosen welding point must be suitable for the corresponding force introduction.

Separate welding instructions for the welding procedure and filler metals are supplied with the VRBS.

VRBS Ring

Posted on:

VRBS-Ring VRL

Forged load ring according to EN 1677-1.

100% electromagnetic crack detected; pink powder coated.

Meets the requirements of the respective employer’s liability insurance association.