VRBS Load Ring Welded

Posted on:

Eye Plate, ready for welding VRBS

An enhancement of the well established RBS series with an up to 30% increment of the WLL.

The two points of attachment facilitate an even and optimal force distribution into the work piece, thus usage of thinner base plates is possible.

A forged, pink coated ring bracket according to EN1677-1.

The welding block is forged out of a good welding material 1.0577+N (St 52-3).

Low profile, high dynamic, and static strength.

The ring is stowable, thus avoiding the hazard of tripping.

VRBS-FIX Load Ring Welded

Posted on:

Load ring, for welding VRBS-FIX

Weld-on parts without bothersome sub-surface corrosion due to circular HY-weld seam. Smaller weld seam compared to the previous VRBS. Total length and total width identical to the previous VRBS.

No time-consuming alignment between the weld-on blocks and ring. Clamp spring is protected being placed inside the weld-on block. The spring fixes the weld-on blocks to the ring and creates, at the same time, a radial clamping.
No loose items.

Clamping spring avoids rattling noise.

Recognition of inclination angle indicated by markings on the ring and on the blocks in all levels.

VLBS Welding Block

Posted on:

Welding Block ASK-VLBS

The welding block is forged out of the material 1.0577+N (St 52-3) and is marked with the identification number of the permissible nominal WLL.

The patented distance lugs have a distance measurement function for the required spacing to the root weld (approximately 3 mm).

Welding should be carried out by a qualified person according to EN 287-1.

The chosen welding point must be suitable for the corresponding force introduction.

Separate welding instructions for the welding procedure and filler metals are supplied with the VLBS.

VLBS Ring

Posted on:

Lifting Ring D-VLBS

Forged load ring according to EN 1677-1.

100% electromagnetic crack detected.

Pink powder coated.

Meets the approval requirements of the respective employer’s liability insurance association.

VLBS Load Ring Welded

Posted on:

Load Ring VLBS-U with spring

An enhancement of the well-established LBS with an up to 50% increment of the WLL!

The new VLBS ring bracket is forged out of the high strength material CrNiMo with 2 patented inner supporting lugs, facilitates easy hooking-in of suspensions and offers better protection of the clamping springs. Given an inclined or a non-parallel work piece, the support effect is extremely improved.

The pink coated ring bracket is manufactured and tested according to EN 1677-1. The welding block is forged out of a good welding material 1.0577+N (St 52-3).

A protected spring keeps the ring bracket in every required position without tipping, and it also reduces vibration induced noise. The parts are captively held together.

Load Ring VLBS without spring

An enhancement of the well-established LBS with an up to 50% increment of the WLL!

The new VLBS ring bracket is forged out of the high strength material CrNiMo with 2 patented inner supporting lugs.

It provides an optimal sitting of the hook and offers better protection for the clamping springs.

Given an inclined or a non-parallel welding surface, the support effect is extremely improved.

Pink powder coating: both a VIP identification charachteristic and a heat indicator.

The pink coated ring bracket is manufactured and tested according to EN 1677-1. The welding block is forged out of a good welding material 1.0577+N (St 52-3).

PowerPoint® WPPH-S Universal Connection

Posted on:

PowerPoint WPPH-S

The first generation of lifting points for welding with a universal connection for every slinging means (hook and ring assemblies, endless sling chains, round slings, loops, etc).

Version WPPH-S: the standard universal welding connection, using eye hooks for ring assemblies, round slings, wire ropes, hook assemblies, etc.

PowerPoint® WPP-VIP Direct VIP Chain Connection

Posted on:

PowerPoint WPP-VIP

The first generation of weldable lifting points with a double ball-bearing for the direct connection of the 4 mm VIP-chain.

Version WPP-VIP.

Not suitable for permanent swiveling under full load.

PowerPoint® WPP-B Ring Connection

Posted on:

PowerPoint WPP-B

The first generation of lifting points for welding provided with a double ball-bearing, which enables jerk-free tilting, swiveling and turning.

The optimized design avoids the damaging of both the slinging means and the precious load when swiveling.

Version WPP-B: the ring connection for hook assemblies.

Not suitable for permanent swiveling under full load.