Load Ring VWBG-V/VWBG Metric Thread

Posted on:

Lifting Point-Vario VWBG-V
(variable thread lengths also available)

Suitable for all loads which swivel and tilt. Can be loaded in all directions with a 4:1 design factor.

Swiveling under full load is permissible provided the inclination angle is not perpendicular to the screw-in direction.

Not suitable for permanent swiveling under full load. Can also be supplied with variable (vario) thread lengths.

Easy assembly due to the single threaded tapping.
High tensile, inspected suspension ring.

Lifting Point threaded VWBG
(variable thread lengths also available)

With increased WLL in axial direction and when load ring is aligned.

Surface: pink powder coated.

For all loads, which have to be flipped and turned-over. Loadable in any direction: safety factor 4. Can be turned under load. Cannot be turned continuously in 90° direction at full load.

Simple assembly, just a tapped hole is required.
High tensile, tested lifting lug acc. to EN1677-4.

Load Ring VLBG, UNC Thread

Posted on:

Load Ring VLBG UNC with bolt

Lifting point with a substitutable, 100% crack detected hexagon head cap bolt.

Load ring is stowable and swivels in all directions.

The load ring must be flexible and adjusted to the load direction before being loaded. Ensure that there is no contact between the ring and the edges of the work piece. Avoid swiveling under full load.

A single threaded hole or a through hole is necessary. A very small construction.

Load Ring VLBG, Metric Fine-Thread

Posted on:

Load Ring VLBG with metric fine-thread

With a substitutable, 100% crack detected hexagon head cap bolts with variable thread lengths available.

When ordering implicitly indicate the required length.

Load ring is stowable and swivels in all directions.

The load ring must be flexible and adjusted to the load direction before being loaded. Ensure that there is no contact between the ring and the edges of the work piece. Avoid swiveling under full load.

A single threaded hole or a through hole is necessary. A very small construction.

Load Ring VLBG, Metric Thread

Posted on:

Load Ring VLBG, with bolt

With a fully captive but easy to demount 100% crack detected hexagon head cap bolt.

Load ring is stowable and pivots in all directions.

The load ring must be flexible and adjusted to the load direction before being loaded.

Ensure that there is no contact between the ring and the edges of the work piece.

Avoid swiveling under full load.

A single threaded hole or a through hole is necessary. A very small construction.

Load Ring VLBG, with variable length

Fully captive 100% crack detected hexagon head cap bolts with variable thread lengths available.
When ordering implicitly indicate the required length.
Including washers and crack detected nuts.

Load ring is stowable and swivels in all directions.

The load ring must be flexible and adjusted to the load direction before being loaded. Ensure that there is no contact between the ring and the edges of the work piece. Avoid swiveling under full load.

A single threaded hole or a through hole is necessary. A very small construction.

Starpoint VRS, UNC Thread

Posted on:

Starpoint VRS

RUD-Starpoint.

Star shaped design, a clear distinction from the DIN 580 eye bolt.

With a striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F (not permissible for DIN 580).

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

Starpoint VRS-F

RUD-Starpoint.

Star shaped design, a clear distinction from the DIN 580 eye bolt, with a star key.

With a striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F (not permissible for DIN 580).

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

Starpoint VRS, Metric Fine-Thread

Posted on:

Starpoint VRS

Star shaped design, a clear distinction from the DIN 580 eye bolt.

With a striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F (not permissible for DIN 580).

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

Starpoint VRS-F

Star shaped design with a star key, a clear distinction from the DIN 580 eye bolt.

With a striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F (not permissible for DIN 580).

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

Starpoint VRS, Metric Thread

Posted on:

Starpoint VRS

Star shaped design, a clear distinction from the DIN 580 eye bolt.

Colour: striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F.

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

Starpoint VRS-F

Star shaped design, a clear distinction from the DIN 580 eye bolt, with a star key.

Colour: striking fluorescent pink powder coating.

Identification: clear WLL indication for the most unfavourable load direction F.

Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4:1 design factor.

VIP-Oval-Link PP

Posted on:

VIP-Oval-Link PP

Forged special link for small load hooks, extremely light construction with a flattened centre corresponding to the respective VIP chain diameter.

Suitable for universal swivels or for PowerPoint lifting points.

Surface: pink powder coated.

VIP-Cobra Eye Sling Hook

Posted on:

VIP-Cobra Eye Sling Hook

The VIP-Cobra Hook has a ring connection and all the advantages of a RUD Clevis hook.

The forged safety latch is engaged in the tip of the hook, and is thus protected against lateral bending.

With a triple coiled corrosion protected double leg spring.

PowerPoint® PP-VIP Direct VIP Chain Connection, UNC Thread

Posted on:

PowerPoint PP-VIP

The first generation of lifting points with a double ball bearing for the direct connection of the VIP chain.

Version PP-VIP.

Even under full load, can be turned in a 90° position from the bolt centre line.

Not suitable for permanent swiveling under full load.

So-PowerPoint PP-VIP

Thread reach with different lengths is available.

WLL is equivalent to that of WBG-V, since a corresponding lower part is used. Connection only with RUD approved components.

Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.