PSA-INOX-STAR-Eyebolt M12, length= 50

Description

Lifting point to be used as an anchor point for personal protective equipment (acc. to DIN EN 795), certified by the German BG BAU ( Employer's insurance association of the building industry).

Penta-shaped, distinctive variety to DIN 580 eye bolt.

Marking: acc. to DIN EN 365 including statement for the number of load bearing persons (1 person).

Forged material 1.4462; 100% electromagnetic crack inspected, with a good resistance against removing and local corrosion, like pitting or selective corrosion, crevice corrosion, and stress crack corrosion in salt water and high-chloride, as well as in H2S containing medias.

The material must not be used in the following environment: indoor swimming pool atmosphere, especially at load bearing construction, without being constantly flushed by water or regularly cleaned. If that happens, the malfunction leads to personal injuries.

For example as a fixing of water slides or any other construction element (ISER-code of practice 831).

Safety factor: 4

Bolt in material quality should be at least 1.0037 (ST37).

In light metal, non-ferrous heavy metal, grey cast iron, concrete, wood, and stone, the determination of the thread must be chosen in such a way that the thread working load complies with the base material (please observe the data of the plug manufacturer).

Blind holes must be drilled deep enough to make sure that the bearing surface sits properly.

Screw down the PSA-INOX-Star without any additional washer into the base material, until the bearing surface of the hexagon socket screw sits close to the bolt-on surface.

If the PSA-INOX-STAR is supposed to be fixed permanent at the load accepting point, please tighten the hexagon socket screw of the PSA with a torque of 25 nm.

Sinking of the threaded hole should have the diameter of the nominal thread.

During usage please control that the hexagon socket screw is tightened.

If shock load, turning or vibration occurs, especially in steel when through-hole fixing with nut is used, an unintentional loosening can happen.

Securing method: liquid thread locking, for example Loctite (please pay attention to the manufacturer's instruction).

PSA-INOX-STAR must be able to be turned by 360° when screw is tightened.

Captive hexagon socket screw.

Component is protected by Patent: GM9402014

GM 9316475 additional patents are applied.