: : : UNIROPE LTD. : : Wire Ropes : : :


	home >> products >> wire ropes >> Class 6x19 IWRC and Fiber Core


		Wire Rope Selection

		Technical Information



		Detailed Wire Rope Data:

		6x19 Class

		6x37 IWRC and FC

		Compac® 6

		Python® Construct-6

		8x19 / 8x25 / 8x36 IWRC

		Other (Metric) Overhead Crane Rope

		Python® Super 8C

		Python® Super 8R and Super 8V

		Python® Multi

		Python® Power-9

		Python® Ultra



		8x19 Spin Resistant

		Python® UNI-4

		19x7 Rotation Resistant

		Python® Compac 18

		Python® Compac 35

		Python® Hoist

		Python® Lift



		Galvanized Cable (Carbon Steel)

		Stainless Steel Wire Rope and Cable

Class 6x19 IWRC and Fiber Core


		to Wire Ropes Main Page






Do NOT use class 6x19 wire rope attached to a swivel. The rope WILL unlay resulting in an unsafe condition. Block Twisting (Cabling) will occur when used exceeding certain lifting heights. Call for advice

Main Applications:
Rope for UNI-LOC® Wire Rope Slings.
Applications which demand a more crush- & abrasion resistant wire rope. Winch lines, railings, suspension cables, boom pendants, boom hoist ropes, anchor lines. Also used as hoisting rope on many old design overhead cranes.

Rope Characteristic:
Wear & crush resistant, but not very flexible. Less fatigue resistant then 6x36 rope.

Standard:
ASTM 1023/A 1023M, Table 11
CSA G-4-00
RR-W-410E

Rope Diameter / Rope Construction these ropes are typically supplied in:
5/16 – 3/8" = 6 x 19 Seale
7/16 – 3/4" = 6 x 26 WS
7/8" & up = 6 x 25 Filler

Class 6x19 wire rope is NOT rotation- or spin resistant.

Breaking Strengths
Note: The maximum CAPACITY, WORKING LOAD LIMIT (WLL), or LINE PULL of the rope usually is 1/5 of the below stated values. For specific information consult the standards applicable to your rope application.

Class 6x19 IWRC (Steel Core)

Rope
dia.
inch

Nominal Strength
tons of 2000 lbs
EIPS

Weight
per foot
lbs.

5/16

5.2

.18

3/8

7.5

.25

7/16

10.2

.34

1/2

13.3

.44

9/16

16.8

.56

5/8

20.6

.69

3/4

29.4

.99

7/8

39.8

1.35

51.7

1.76

1-1/8

65.0

2.23

1-1/4

79.9

2.75

1-3/8

96.0

3.50

1-1/2

114.0

3.96

Class 6x19 FC (Fiber Core)

Rope
dia.
inch

Nominal Strength
tons of 2000 lbs
EIPS

Weight
per foot
lbs.

1/4

3.0

.10

5/16

4.7

.16

3/8

6.7

.23

7/16

9.1

.31

1/2

11.8

.40

9/16

14.8

.51

5/8

18.4

.63

3/4

26.2

.90

7/8

35.4

1.23

45.9

1.60




	Home \| Products \| Products in Use \| Inspection & Testing \| Training Seminars \| About Us / Contacts Wire Ropes \| Wire Rope Slings \| Wire Rope End Attachments \| Rigging Hardware \| Chain- and Wire Mesh Slings Twin-Path® and Synthetic Lifting Slings \| Fiber Ropes \| Load Securement \| Clamps & Magnets \| Hoists & Pullers PIAB Load Measurement \| Utility Specific Products



	© 2003-2010 Unirope Ltd. :: Web Design and Layout :: BAUSTEIN Strategic Design Group Inc.