WearPad Nylon Webbing with 'BALLISTIC'
Reinforcement
Many customers requested a multiple layer heavy duty wear pad which can
easily be installed onto existing slings AND permit the sling to be inspected
without shifting or removing the wear pad itself. Our solution is PROTEC™
which is constructed from a minimum of two (2) layers of buffer nylon to
smooth load corners and edges. As a standard, the buffer layer which is
contact with load is encased in Ballistic™ that is, Ballistic™
is folded into the buffer to prevent the edges from premature wear. As an
option PROTEC™ is available with up to 4 layers of nylon buffer. Shown
here are 3 layers; two of which are yellow, and one which is encased in
black Ballistic™. |
|
 |
| |
| PROTEC is used with Uni-Path® and Twin-Path®
Lifting slings. Shown above is a 3-layered Protec™ Wear Pad with
2 fixed- and one (1) optional Velcro® holding strap. |
| |
 |
|
 |
As with our other wear pads,
PROTEC™ is also availabe with optional Velcro® holding straps
for ease of installation. |
|
