: : : UNIROPE LTD. : : Rigging Hardware : : :


	home >> products >> rigging hardware >> eye bolts and hoist rings >> Jergens Side-Pull Style Hoist Rings


		Detailed Rigging Hardware Data:

		Shackles & Hooks

		Thimbles and Corner Protectors

		Cable Clips

		Load Positioning Swivels

		Eye Bolts and Hoist Rings

		Rope Cutters and Hand Swagers

Jergens Side-Pull Style Hoist Rings


		to Eye Bolts and Hoist Rings Main Page

The full swivel and pivot action of the Jergens Hoist Ring allows you to flip and turn parts without unhooking. Plus, the extra-large diameter rings let you use almost any size hook.

Rated at 5:1 Strength Factor
Material: Alloy Steel
Clevis, Ring, Bushing and Cap Screw are magnetic particle inspected
Clevis is x-rayed
Finish: Black Oxide
Bushing: Zinc Plated with conversion coating, yellow (inch), clear blue (metric)
Proof Tested to 200% of Rated Load Capacity
Available with Envirolox™ protective finish

Part Number	Thread	Load Capacity*	B	C	D	E	F	G	Torque**	Replacement Bolts

47311	5/16-18	650	2	2 1/8	2	1 1/2	5/8	3/8	3.5	47341
47312	3/8-16	800	2	2 3/8	2	1 1/2	3/4	3/8	4.5	47342
47313	1/2-13	1800	3	3 3/8	3 3/16	2 3/8	1	5/8	15	47343

47314	5/8-11	2500	3	3 5/8	3 3/16	2 3/8	1 1/4	5/8	25	47344
47315	3/4-10	4100	4	5	5	3 3/4	1 1/2	1	50	47345
47316	1-8	7100	4	5 3/8	5	3 3/4	2	1	90	47346

47317	1 1/4-7	14000	6	6 7/8	6 13/16	4 5/8	2	1 3/8	150	47347
47317-08	1 1/4-8	14000	6	6 7/8	6 13/16	4 5/8	2	1 3/8	150	-
47318	1 1/2-6	17200	6	7 7/8	6 13/16	4 5/8	2 1/2	1 3/8	250	47348

47318-08	1 1/2-8	17200	6	7 7/8	6 13/16	4 5/8	2 1/2	1 3/8	250	-
47319	2-4 1/2	29000	5 1/4x10 1/2	10	6 13/16	4 5/8	3 1/8	1 1/2	300	47349
47319-08	2-8	29000	5 1/4x10 1/2	10	6 13/16	4 5/8	3 1/8	1 1/2	300	-


METRIC

47351	M 8x1.25	325	50.8	61	50.8	38.1	16	9.5	0.43	47391
47352	M 10x1.50	500	50.8	63	50.8	38.1	20	9.5	0.6	47392
47353	M 12x1.75	725	76.2	85	81	60.3	24	15.9	2	47393

47354	M 16x2.0	1400	76.2	94	81	60.3	31	15.9	3.5	47394
47355	M 20x2.5	2290	101.6	133	125.4	95.3	40	25.4	7	47395
47356	M 24x3.0	3050	101.6	147	125.4	95.3	47	25.4	12.5	47396

47357	M 30x3.5	4850	152.0	173.8	173.0	117.5	43.6	31.7	34.6	47397
47358	M 36x4.0	7500	152.0	191.0	173.0	117.5	67.5	35.0	55.0	-

* Stated load capacity based on specific thread torques as shown in chart.
** It is recommended that these torques be used when installing hoist rings.




	Home \| Products \| Products in Use \| Inspection & Testing \| Training Seminars \| About Us / Contacts Wire Ropes \| Wire Rope Slings \| Wire Rope End Attachments \| Rigging Hardware \| Chain- and Wire Mesh Slings Twin-Path® and Synthetic Lifting Slings \| Fiber Ropes \| Load Securement \| Lifting Clamps \| Hoists & Pullers PIAB Load Measurement \| Utility Specific Products



	© 2003-2008 Unirope Ltd. :: Web Design and Layout :: BAUSTEIN Strategic Design Group Inc.