Unirope Logo
Home Products Inspection and Services
Gray bar shadow
  Detailed Rigging Hardware Data:  
  Shackles & Hooks  
  Thimbles and Corner Protectors  
  Cable Clips  
  Load Positioning Swivels  
  Eye Bolts and Hoist Rings  
  Rope Cutters and Hand Swagers  
Fist Grip Clips, forged
     
Back
  to Cable Clips Main Page
 
     
Fist Grip Clips are preferable to U-Bolt clips. They can not be installed incorrectly (upside down) and they cause less damage to the rope. It is easier to torque the nuts from both sides. Also, fewer clips are required per splice as compared to U-Bolt Clips. Fist Grip Clips have to be re-torqued after a test load. Installation must be done by a TRAINED and COMPETENT person.

For detailed installation instructions consult Unirope or your local Unirope Distributor.

Wire rope strength will decrease to 80% of catalogue breaking strength up to 7/8" rope diameter, and to 90% above 7/8" rope diameter, even when Fist Grip Clips are properly installed.
 
     
Dimensions (inch) for Crosby Forged Fist Grip Clips
Wire Rope
dia.
Minimum
No. of Clips
required

Rope
required for
Turn Back

Torque
required
in ft. lbs.

D E G L M N lbs. per
100
3/16 2 4 30 .94 .38 1.28 1.63 .69 1.47 23
1/4 2 4 30 .94 .38 1.28 1.63 .69 1.47 23
5/16 2 5 30 .94 .38 1.47 1.94 .69

1.56

28
3/8 2 5-1/4 45 1.06 .44 1.81 1.38 .75 1.88 40
7/16 2 6-1/2 65 1.06 .50 2.19 2.75 .88 2.19 62
1/2 3 11 65 1.25 .50 2.19 2.75 .88 2.19 62
9/16 3 12-3/4 130 1.25 .63 2.69 3.50 106 2.63 103
5/8 3 13-1/2 130 1.50 .63 2.69 3.50 1.06 2.63 103
3/4 3 16 225 1.50 .75 2.94 3.75 1.25 3.06 175
7/8 4 26 225 1.81 .75 3.31 4.13 1.25 3.14 225
1 5 37 225 2.13 .75 3.72 4.63 1.25 3.53 300
1-1/8 5 41 360 2.25 .88 4.19 5.25 1.44 3.91 400
1-1/4 6 55 360 2.38 .88 4.25 5.25 1.44 4.03 400
1-3/8 6 62 500 2.50 1.00 5.56 7.00 1.63 4.66 700
1-1/2 7 78 500 3.00 1.00 5.56 7.00 1.63 4.66 700
     
     
    Back to Top  
     
© 2003-2008 Unirope Ltd. :: Web Design and Layout :: BAUSTEIN Strategic Design Group Inc.