| |
| |
| |
| |
| |
WARNING!
Any warranties, expressed or implied, concerning the use
of Wire Rope Products apply to the minimum breaking strength
of new, unused Wire Rope when tested in a standard testing
machine, under controlled conditions, in direct tension,
with both ends fixed to prevent rotation under load, and
at a uniform rate of speed. The Terms 'Working Load Limit
(WLL)', 'Capacity', 'Minimum Breaking Strength', 'Nominal
Breaking Strength', or 'Acceptance Strength' contains
no implication of what load a Wire Rope will withstand
if not properly used, or if it suffers abuse. All equipment
using Wire Rope must be properly maintained. Wire Rope
and their attached hardware must be properly stored, handled,
used and maintained. Most importantly, Wire Rope and their
attached hardware must be regularly inspected before and
during each use. Inspections must meet local, or applicable
national safety regulations. Damage, abuse, overloading,
or improper maintenance can cause failure and accidents.
Wire Rope removal criteria are based on steel sheaves.
If synthetic sheaves are used, consult the sheave manufacturer.
If in doubt about the safe and proper use of these products
consult
Unirope Limited at 1.800.457.9997. |
|
|
