home >> products >> wire rope end attachments >> Loop Back SOLID Thimble Splice (S 412 Thimble)

Wire Rope End Attachments:     Efficiency of End Attachments       UNI-LOC® Flemish Eye:     Loop Splice     Thimble Splice     Solid Thimble Splice       EN 13411-3 Loop Back Splice (formerly DIN 3093):     Aluminum Sleeve Splice     Thimble Splice     Solid Thimble Splice       UNI-LOC® Swaged Fittings:     Open Swage Socket     Closed Swage Socket     Open Spelter Socket     Closed Spelter Socket     Standard Buttons     Torpedo & Spelter Buttons     Becket Loops     Threaded Fittings     Nico Sleeves & A/C Fittings     Terminator™ Wedge Socket     Cable Grips     Fused and Tapered Rope Ends     Field-cutting a Rope

Loop Back SOLID Thimble Splice (S 412 Thimble)         to Wire Rope End Attachments Main Page             with Crosby cast Solid Thimble and EN 13411-3 Aluminum Sleeve. Thimbles to DIN 3091: See below       Solid Thimbles are used where the sling (or rope) is connected to a straight pin. This makes an excellent permanent installation. Within certain limitations we can increase or bush the bore hole, or we can mill down dimension 'H' to fit a narrower slot. These thimbles are mainly used on crane ropes.     Dimensions (inch) for Crosby S 412 Solid Thimbles Wire Rope dia. A B D E F H J K lbs each 1/2 2.81 1.75 1.06 .75 .56 .88 2.13 1.63 .61 5/8 4.69 3.00 1.31 1.06 .81 1.13 3.38 2.25 2.21 3/4 4.69 3.00 1.50 1.06 .81 1.38 3.38 2.25 2.32 7/8 6.06 3.81 1.75 1.38 1.06 1.63 4.50 3.25 5.45 1 6.06 3.81 2.13 1.38 1.06 1.81 4.50 3.25 5.25 1-1/8 7.25 4.56 2.38 1.75 1.31 2.06 5.38 3.88 9.29 1-1/4 7.25 4.56 2.63 1.94 1.53 2.31 5.38 3.88 9.81 1-3/8 7.25 4.56 2.63 1.94 1.53 2.31 5.38 3.88 9.81   For other dimension please refer to our catalogue "Wire Rope Lifting Slings" page 44. Solid thimble bores can be bushed or bored out. The width can be milled down. Please ask for our specific advise.     with DIN 3091 Solid Thimble and Aluminum sleeve to EN 13411-3   Dimensions for DIN 3091 Solid Thimble Splice Nominal wire rope diameter mm Nominal wire rope diameter inch Nominal thimble size # Raw bore diameter mm Max. bore diameter mm 14 N/A 14 29 35 16 N/A 16 32 40 18 N/A 18 35 45 20 N/A 20 40 50 22 N/A 22 43 55 24 N/A 24 46 60 26 N/A 26 49 65 28 N/A 28 52 70 30 N/A 32 58 80 32 N/A 32 58 80 34 N/A 36 59 90 36 N/A 36 59 90         Back to Top

	Home  |  Products  |  Products in Use  |  Inspection & Testing  |  Training Seminars  |  About Us / Contacts Wire Ropes  |  Wire Rope Slings  |  Wire Rope End Attachments  |  Rigging Hardware  |  Chain- and Wire Mesh Slings Twin-Path® and Synthetic Lifting Slings  |  Fiber Ropes  |  Load Securement  |  Clamps & Magnets  |  Hoists & Pullers PIAB Load Measurement  |  Utility Specific Products

	© 2003-2010 Unirope Ltd. :: Web Design and Layout :: BAUSTEIN Strategic Design Group Inc.