|
 |
|
|
| |
|
|
|
|
| |
|
|
 |
|
|
 |
| |
During fabrication, ropes are lubricated; the kind and amount depending on the rope's size, type and use, if known. This in-process treatment will provide the finished rope with ample protection for a reasonable time if it is stored under proper conditions, and in the early stages of the rope's working life. It must be supplemented, however, at regular intervals since possible corrosion and increased friction within the rope greatly reduce its working life.
Python® ropes are factory lubricated using either Nyrosten N 800 or Nyrosten T 55. Both of these types are being heated up to about 250°C during the factory application. At room temperature they have the consistency of molasses or thick honey which makes it impractial to impossible to use these 'original' types "in the field" to re-lubricate the ropes.
For 'field' re-lubrication the Nyrosten company has formulated two special types: |
| |
|
|
|
Nyrosten N 113
in 510 gr. (18 oz) spray cans |
Nyrosten N 113 FS
in 20L (5.3 gal) pales |
|
 |
|
 |
|
| |
| Nyrosten has a brown consistency and has terrific creep properties to penetrate to the rope's inside. Nyrosten N 113 FS can be applied with air-pressure sprayers. |
| |
|
|
|
|
Download MSDS Information ENGLISH (PDF format, 20kb)
Download MSDS Information for liquid (bulk) Nyrosten N113 FS(PDF format, 36kb)
Download MSDS Information FRENCH
(PDF format, 20kb)
Nyrosten Can Label (to the right):
Download PDF version (1.1Mb) |
|
 |
|
| |
| |
|
|
| |
|
Back to Top |
| |
|
|
|
